It shows one 60 N crate lifted by a lever, pulleys and gears, with a force meter and rulers showing the pull shrink as the distance grows. Year 5 has to learn that levers, pulleys and gears let a smaller force have a greater effect. It is hard to show with a ruler and a rubber. Put this on the board instead: one 60 N crate, three machines, and a yellow handle to drag. The force meter shows how hard you pull and the rulers show how far, so the class sees both at once: the pull gets smaller, and the hand moves further.
They let a smaller force lift the same load by making that force move further: halve the pull and your hand travels twice as far. The lever: move the pivot from the middle to right by the crate and the pull drops from 60 N to 30 N to 15 N, while your end of the bar moves 10, 20, then 40 cm to lift the crate 10 cm. The pulleys: one wheel only changes direction; two and four wheels share the crate between more lengths of rope. The gears: a 10 tooth gear turns a 30 tooth gear, so a 20 N push lifts the crate and the handle goes round 3 times as far. Swap them and the crate shoots up, 3 times faster and 3 times harder. The switch in the bottom right slides along the bench from one machine to the next.
Go to step 4, where the same crate sits beside the machine with no machine, ask which pull is bigger and which hand moves further, then press Lift both. No machine: 60 N, up 5 cm. With the lever: 15 N, down 20 cm.
Drag the yellow handle with a finger or a mouse: the meter stretches, then the crate follows. Step through five steps for each machine, or press Play and watch. Press a name to zoom in and read two or three plain sentences, quiz the class with every name hidden behind a question mark, draw on it, or print a labelling sheet. More detail adds effort, load, fulcrum, mechanical advantage and work done in joules. Share copies a link that opens it as it is.
It is for ages 7 to 14: Years 3 to 9 in England and 2nd to 8th grade in the United States, with Year 5 forces at its heart. In England it supports Year 5 science, Forces: "some mechanisms, including levers, pulleys and gears, allow a smaller force to have a greater effect", and Key Stage 3 physics on simple machines and work done. In the United States, NGSS has no standard just for simple machines, so it fits any simple machines unit rather than one code. The nearest standards are 3-PS2-1, on balanced and unbalanced forces, and MS-PS2-2, on how forces change the way things move.
How do levers, pulleys and gears make work easier?
They let a small force move a heavy load. The price is distance: the small force has to move further. A 15 N pull can lift a 60 N crate, but your hand moves 4 times as far as the crate does.
Why does moving the pivot make a lever easier?
The longer your side of the bar, the smaller the pull you need. With the pivot 4 times nearer the crate than your hand, the pull is 4 times smaller, and your end moves 4 times further.
Why do more pulley wheels make lifting easier?
With one fixed wheel you only change direction: pull down to lift up. Add a wheel that rises with the load and two lengths of rope hold it, so each takes half. With four lengths of rope the pull is a quarter, and you pull four times as much rope.
How do gears change force and speed?
A small gear turning a big gear makes the big gear turn slower but with more turning force. Here 10 teeth turn 30 teeth, so lifting is 3 times easier and the handle goes round 3 times as far. Swap them and it is 3 times faster but 3 times harder. Two gears that touch always turn opposite ways.
What is mechanical advantage?
It is how many times bigger the load is than the effort. A lever that lifts 60 N with a 15 N pull has a mechanical advantage of 4. Work done, force times distance, is the same on both sides: a machine never gives out more than you put in.
What has been simplified?
There is no friction, and the bar, rope and wheels weigh nothing, so real pulls are a little bigger. The pulley wheels are drawn side by side; real ones often share one axle. The gear teeth are extra chunky so they show from the back of the room. The handle is as long as the drum is wide from its middle, so the gears do all the helping.
What age is it for?
Ages 7 to 14. Simple uses plain words: pull, pivot, force meter. More detail adds effort, load, fulcrum, mechanical advantage and work done.
Is it free?
Free to try. Opening Science Simulations uses one token for the whole day, however many times you come back to it. Every account gets 20 free tokens, and Pro gives 50 a day.
How do pulleys work, simply?
A single fixed wheel only changes the direction of the pull, so you pull down to lift up. Add a wheel that rises with the load and more lengths of rope share the weight, so each pull is smaller but you pull more rope. On the board, two lengths of rope halve the 60 N and four lengths make it 15 N.
What is a simple machine?
A simple machine is a basic device that changes the size or direction of a force, so a job needs less effort. The classic six are the lever, the pulley, the wheel and axle, the ramp, the wedge and the screw. Gears are wheels with teeth, and Year 5 learns them alongside levers and pulleys.
The seasons simulation shows why the tilted Earth has summer and winter. All of them are on the Science Simulations page.